ELECTRICAL SUBMERSIBLE PUMP PACKER
This Wellcare Electric Submersible Pump(ESP) Packer is used with a completion that requires an electric submersible pump below the packer to assist in pumping the formation fluids to the surface. The ESP packer incorporates aby pass or pass – through section to provide means for an electric cable to be run through the packer to supply power to the electric submersible pump below the packer.
This ESP packer is a single-mandrel, dual-bore hydraulic-set production packer. The packer has a NPT chemical injection port and one NPT port for a vent valve. The packer is set by pressuring up the tubing string against a plugging device below the packer and is locked in the set position mechanically by an internal slip. Bi-directional, case-carburized slips hold the packer against well pressures from above and below.
Release and retrieval is accomplished straight upward pull on the tubing string.
